I'm building up a HTPC based on a Zotac IONITX U-E. It has a ALC662 and a Nvidia-HDMI audio device.
lscpi
- Code: Select all
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
04:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
oss finds only the ALC662:
/usr/lib/oss/etc/installed_drivers
- Code: Select all
oss_hdaudio #Intel High Definition Audio (ICH7)
ossmix -vvv
- Code: Select all
Selected mixer 0/High Definition Audio ALC662
Known controls are:
jack.green.mode <front|input> (currently front)
jack.green.mute ON|OFF (currently OFF)
jack.green.front [<leftvol>:<rightvol>] (currently 51.9:51.9 dB)
jack.green.front-mute ON|OFF (currently OFF)
jack.green.mix-mute ON|OFF (currently OFF)
jack.pink.mode <c/lfe|input> (currently c/lfe)
jack.pink [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.pink.mute ON|OFF (currently OFF)
jack.pink.center/lfe [<leftvol>:<rightvol>] (currently 51.9:51.9 dB)
jack.pink.center/lfe-mute ON|OFF (currently OFF)
jack.pink.mix-mute ON|OFF (currently OFF)
jack.fp-pink.mode <front|c/lfe|input> (currently front)
jack.fp-pink [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.fp-pink.mute ON|OFF (currently OFF)
jack.blue.mode <rear|input> (currently input)
jack.blue.mute ON|OFF (currently OFF)
jack.blue.rear [<leftvol>:<rightvol>] (currently 51.9:51.9 dB)
jack.blue.rear-mute ON|OFF (currently OFF)
jack.blue.mix-mute ON|OFF (currently OFF)
jack.fp-green.mode <front|c/lfe|input> (currently front)
jack.fp-green [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.fp-green.mute ON|OFF (currently OFF)
record.mix.mute.c/lfe1 ON|OFF (currently OFF)
record.mix.mute.fp-mic1 ON|OFF (currently OFF)
record.mix.mute.rear1 ON|OFF (currently OFF)
record.mix.mute.fp-headphone1 ON|OFF (currently OFF)
record.mix.mute.front1 ON|OFF (currently OFF)
record.mix.mute.mix1 ON|OFF (currently OFF)
record.mix1 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
record.mix.mute.c/lfe2 ON|OFF (currently OFF)
record.mix.mute.fp-mic2 ON|OFF (currently OFF)
record.mix.mute.rear2 ON|OFF (currently OFF)
record.mix.mute.fp-headphone2 ON|OFF (currently OFF)
record.mix.mute.front2 ON|OFF (currently OFF)
record.mix.mute.mix2 ON|OFF (currently OFF)
record.mix2 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
misc.c/lfe [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
misc.fp-mic [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
misc.rear [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
misc.fp-headphone [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
misc.front [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
misc.mix <c/lfe|fp-mic|rear> (currently c/lfe)
vmix0-enable ON|OFF (currently ON)
vmix0-rate <decimal value> (currently 48000) (Read-only)
Sample rate currently used by virtual mixer on this device.
vmix0-channels <Stereo|Multich> (currently Stereo)
vmix0-src <Fast|High|OFF> (currently Fast)
Sample rate conversion quality used by the virtual mixer.
vmix0-outvol <monovol> (currently 25.0 dB)
vmix0-outvu [<leftVU>:<rightVU>] (currently 0:0) (Read-only)
vmix0-invol <monovol> (currently 25.0 dB)
vmix0-invu [<leftVU>:<rightVU>] (currently 0:0) (Read-only)
vmix0.pcm6 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
vmix01 [<leftVU>:<rightVU>] (currently 0:0) (Read-only)
vmix0.pcm7 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
vmix02 [<leftVU>:<rightVU>] (currently 0:0) (Read-only)
vmix0.pcm8 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
vmix03 [<leftVU>:<rightVU>] (currently 0:0) (Read-only)
vmix0.pcm9 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
vmix04 [<leftVU>:<rightVU>] (currently 0:0) (Read-only)
1. Question
The board has an optical output and a coax digital output. But I didn't find an option in ossmix for spdif. I wanted to use oss for that thing, because on my other computer (Xonar DS) I can configure the bit rate to 192 khz for spdif. Is there a chance to configure the ALC-662 for spdif?
2. Question
How can I access the nvidia HDMI audio device? In any other forums (e.g. Ubuntu-Wiki) they write howto access it via alsa. It's neccessary to install alsa-oss. So is there a chance to access it via OSS directly without any alsa stuff?
3. Question
Assumed the optical and the HDMI output devices are working. Is there a chance to send to sound to both devices parallel? It's neccessary to connect the HTPC via HDMI to the TV in order to see TV without a HIFI system and on the other hand to connect the AV receiver via toslink cable to watch TV and use the HIFI system for the sound issues.
Thanx a lot in advance for your help.