it is me again. OSS-v1008 worked so far concerning the
detection of the hardware. But the interaction with the
GNOME audio slider in the taskbar lacks. This were on
Solaris b70 (SXDE 07/09).
This time I tried OSS-v1009 (06. 11. 2007) with Solaris
b75. And there are some issues. I am mainly concerned
about the I/O error below.
OSStest revealed some failures. See log:
- Code: Select all
# osstest
Sound subsystem and version: OSS 4.0 (b1009/200711060907) (0x00040003)
Platform: SunOS/i86pc 5.11 snv_75
*** Scanning sound adapter #-1 ***
/dev/oss/hdaudio0/pcm0 (audio engine 0): ATI HD Audio play output
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured>
/dev/oss/hdaudio0/pcm1 (audio engine 1): ATI HD Audio <null> output
- Performing audio playback test...
<left> Device returned error: I/O error
/dev/oss/hdaudio0/pcmin0 (audio engine 2): ATI HD Audio rec input
- Skipping input only device
*** Some errors were detected during the tests ***
Then I was so keen to type the following command to give
you more infos about the system which are maybe of some
help:
- Code: Select all
# ossinfo -v1
Version info: OSS 4.0 (b1009/200711060907) (0x00040003)
Platform: SunOS/i86pc 5.11 snv_75 (solar-star)
Number of audio devices: 3
Number of audio engines: 11
Number of MIDI devices: 0
Number of mixer devices: 1
Device objects
0: osscore0 OSS common devices
1: hdaudio0 ATI HD Audio
HD Audio controller ATI HD Audio
Vendor ID 0x1002437b
Subvendor ID 0x30b0103c
Codec 0: AD1981 (0x11d41981/0x103c30b0)
Codec 1: Unknown (0x14f12bfa)
2: ossusb0 USB audio/MIDI device
3: vmix0 OSS transparent virtual support
4: sadasupport0 SADA compatibility layer
MIDI devices (/dev/midi*)
Mixer devices (/dev/mixer*)
0: ATI HD Audio AD1981 (Mixer 0 of device object 1)
Device file /dev/oss/hdaudio0/mix0, Legacy device /dev/mixer0
Priority: 10
Caps:
Audio devices
/dev/oss/hdaudio0/pcm0 ATI HD Audio play output (device index 0)
Legacy device /dev/dsp0
Caps: DUPLEX TRIGGER
Modes: IN/OUT
Out engine 1: Available for use
Engine 2: Available for use
Engine 3: Available for use
Engine 4: Available for use
Engine 5: Available for use
Engine 6: Available for use
Engine 7: Available for use
Engine 8: Available for use
Engine 9: Available for use
/dev/oss/hdaudio0/pcm1 ATI HD Audio <null> output (device index 1)
Legacy device /dev/dsp1
Caps: TRIGGER
Modes: OUTPUT
Out engine 1: Available for use
/dev/oss/hdaudio0/pcmin0 ATI HD Audio rec input (device index 2)
Legacy device /dev/dsp2
Caps: DUPLEX TRIGGER
Modes: IN/OUT
In engine 1: Available for use
Engine 2: Available for use
Engine 3: Available for use
Engine 4: Available for use
Engine 5: Available for use
Engine 6: Available for use
Engine 7: Available for use
Engine 8: Available for use
Engine 9: Available for use
Hope, this is of help for you and maybe there is
someone who can state if this is a problem at all.
Regards
Roman