Open Sound System

User forums

Skip to content

sblive - no sound

OSS specific BSD discussion (FreeBSD/NetBSD/OpenBSD)

Moderators: hannu, dev, kodachi, cesium

Post a reply

sblive - no sound

Postby chedder » Wed Jul 11, 2007 1:51 am

everything loads fine, no errors or sound.

Code: Select all
Sound subsystem and version: OSS 4.0 (build 070613/200707050525G(0x00040002)
Platform: FreeBSD/i386 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Wed Jun 13 22:08:48 PDT 2007     root@chaoti
ca:/usr/obj/usr/src/sys/CHAO

*** Scanning sound adapter #-1 ***
/dev/oss/sblive0/pcm0 (audio engine 0): SB Audigy2 main
- Performing audio playback test...
  <left> OK <right> OK <stereo> OK <measured>
/dev/oss/sblive0/pcm1 (audio engine 1): SB Audigy2 front out
- Performing audio playback test...
  <left> OK <right> OK <stereo> OK <measured>
/dev/oss/sblive0/pcm2 (audio engine 2): SB Audigy2 side out
- Performing audio playback test...
  <left> OK <right> OK <stereo> OK <measured>
/dev/oss/sblive0/pcm3 (audio engine 3): SB Audigy2 center/lfe out
- Performing audio playback test...
  <left> OK <right> OK <stereo> OK <measured>
/dev/oss/sblive0/pcm4 (audio engine 4): SB Audigy2 raw S/PDIF (output only)
- Performing audio playback test...
  <left> OK <right> OK <stereo> OK <measured>
/dev/oss/sblive0/pcm5 (audio engine 5): SB Audigy2 5.1 output device
- Skipping multi channel device

*** Scanning sound adapter #0 ***
/dev/oss/vmix0/pcm0 (audio engine 6): SB Audigy2 main (VMIX0)
- Skipping virtual device (use -V to force test)

*** Scanning sound adapter #0 ***
/dev/oss/vmix0/pcm1 (audio engine 7): SB Audigy2 main (VMIX0)
- Skipping virtual device (use -V to force test)

*** Scanning sound adapter #0 ***
/dev/oss/vmix0/pcm2 (audio engine 8): SB Audigy2 main (VMIX0)
- Skipping virtual device (use -V to force test)

*** Scanning sound adapter #0 ***
/dev/oss/vmix0/pcm3 (audio engine 9): SB Audigy2 main (VMIX0)
- Skipping virtual device (use -V to force test)

*** All tests completed OK ***

Mixer vol      is currently set to  80:80
Mixer pcm      is currently set to 100:100
Mixer line     is currently set to  32:32
Mixer mic      is currently set to   0:0
Mixer cd       is currently set to  75:75
Mixer igain    is currently set to  75:75
Mixer line1    is currently set to  32:32
Mixer phin     is currently set to   0:0
Recording source: line

Id Refs Address    Size     Name
1   16 0xc0400000 49da98   kernel
2    2 0xc089e000 1adb8    linux.ko
3    1 0xc08b9000 42e8     if_tap.ko
4    1 0xc08be000 79d898   nvidia.ko
5    1 0xc105c000 80b0     bridge.ko
8    1 0xc1099000 59f20    acpi.ko
9    1 0xc58b3000 2a000    ipl.ko
10    3 0xc5ce0000 7c000    osscore.ko
11    1 0xc5b4c000 16000    sblive.ko
12    1 0xc5cbd000 c000     vmix.ko

Version info: OSS 4.0 (build 070613/200707050525/G^B (0x00040002)
Platform: FreeBSD/i386 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Wed Jun 13 22:08:48 PDT 2007     root@chaoti
ca:/usr/obj/usr/src/sys/CHAO

Number of audio devices:        10
Number of audio engines:        10
Number of MIDI devices:         0
Number of mixer devices:        1


Device objects
0: sblive0 SB Audigy2
1: vmix0 OSS transparent virtual support

MIDI devices (/dev/midi*)

Mixer devices (/dev/mixer*)
0: SB Audigy2 (TR28023) (Mixer 0 of device object 0)
    Device file /dev/oss/sblive0/mix0, Legacy device /dev/mixer0
    Priority: 2
    Caps:

Audio devices
/dev/oss/sblive0/pcm0   SB Audigy2 main  (device index 0)
    Legacy device /dev/dsp0
    Caps: DUPLEX TRIGGER MMAP
    Modes: IN/OUT
      Engine      1: Available for use
      Engine      2: Available for use
      Engine      3: Available for use
      Engine      4: Available for use
      Engine      5: Available for use
/dev/oss/sblive0/pcm1   SB Audigy2 front out  (device index 1)
    Legacy device /dev/dsp1
    Caps: TRIGGER MMAP
    Modes: OUTPUT
      Out engine  1: Available for use
/dev/oss/sblive0/pcm2   SB Audigy2 side out  (device index 2)
    Legacy device /dev/dsp2
    Caps: TRIGGER MMAP
    Modes: OUTPUT
      Out engine  1: Available for use
/dev/oss/sblive0/pcm3   SB Audigy2 center/lfe out  (device index 3)
    Legacy device /dev/dsp3
    Caps: TRIGGER MMAP
    Modes: OUTPUT
      Out engine  1: Available for use
/dev/oss/sblive0/pcm4   SB Audigy2 raw S/PDIF (output only)  (device index 4)
    Legacy device /dev/dsp4
    Caps: TRIGGER MMAP
    Modes: OUTPUT
      Out engine  1: Available for use
/dev/oss/sblive0/pcm5   SB Audigy2 5.1 output device  (device index 5)
    Legacy device /dev/dsp5
    Caps: TRIGGER MMAP
    Modes: OUTPUT
      Out engine  1: Available for use
/dev/oss/vmix0/pcm0     SB Audigy2 main (VMIX0)  (device index 6)
    Legacy device /dev/dsp6
    Caps: DUPLEX TRIGGER MMAP VIRTUAL
    Modes: IN/OUT
      Engine      1: Available for use
      Engine      2: Available for use
      Engine      3: Available for use
      Engine      4: Available for use
/dev/oss/vmix0/pcm1     SB Audigy2 main (VMIX0)  (device index 7)
    Legacy device /dev/dsp7
    Caps: DUPLEX TRIGGER MMAP VIRTUAL SHADOW HIDDEN
    Modes: IN/OUT
      Engine      1: Available for use
      Engine      2: Available for use
      Engine      3: Available for use
/dev/oss/vmix0/pcm2     SB Audigy2 main (VMIX0)  (device index 8)
    Legacy device /dev/dsp8
    Caps: DUPLEX TRIGGER MMAP VIRTUAL SHADOW HIDDEN
    Modes: IN/OUT
      Engine      1: Available for use
      Engine      2: Available for use
      Out engine  1: Available for use
/dev/oss/sblive0/pcm2   SB Audigy2 side out  (device index 2)
    Legacy device /dev/dsp2
    Caps: TRIGGER MMAP
    Modes: OUTPUT
      Out engine  1: Available for use
/dev/oss/sblive0/pcm3   SB Audigy2 center/lfe out  (device index 3)
    Legacy device /dev/dsp3
    Caps: TRIGGER MMAP
    Modes: OUTPUT
      Out engine  1: Available for use
/dev/oss/sblive0/pcm4   SB Audigy2 raw S/PDIF (output only)  (device index 4)
    Legacy device /dev/dsp4
    Caps: TRIGGER MMAP
    Modes: OUTPUT
      Out engine  1: Available for use
/dev/oss/sblive0/pcm5   SB Audigy2 5.1 output device  (device index 5)
    Legacy device /dev/dsp5
    Caps: TRIGGER MMAP
    Modes: OUTPUT
      Out engine  1: Available for use
/dev/oss/vmix0/pcm0     SB Audigy2 main (VMIX0)  (device index 6)
    Legacy device /dev/dsp6
    Caps: DUPLEX TRIGGER MMAP VIRTUAL
    Modes: IN/OUT
      Engine      1: Available for use
      Engine      2: Available for use
      Engine      3: Available for use
      Engine      4: Available for use
/dev/oss/vmix0/pcm1     SB Audigy2 main (VMIX0)  (device index 7)
    Legacy device /dev/dsp7
    Caps: DUPLEX TRIGGER MMAP VIRTUAL SHADOW HIDDEN
    Modes: IN/OUT
      Engine      1: Available for use
      Engine      2: Available for use
      Engine      3: Available for use
/dev/oss/vmix0/pcm2     SB Audigy2 main (VMIX0)  (device index 8)
    Legacy device /dev/dsp8
    Caps: DUPLEX TRIGGER MMAP VIRTUAL SHADOW HIDDEN
    Modes: IN/OUT
      Engine      1: Available for use
      Engine      2: Available for use
/dev/oss/vmix0/pcm3     SB Audigy2 main (VMIX0)  (device index 9)
    Legacy device /dev/dsp9
    Caps: DUPLEX TRIGGER MMAP VIRTUAL SHADOW HIDDEN
    Modes: IN/OUT
      Engine      1: Available for use


any ideas?
chedder
 
Posts: 1
Joined: Wed Jul 11, 2007 1:45 am
Top

Postby booiiing » Mon Sep 29, 2008 9:09 am

i had the same problem, on linux, though.

i solved it by manually setting *_digital_din to 0 in /usr/lib/oss/conf/sblive.conf

after that sound worked for me and now it even works with the default-settings. i guess ALSA left some stuff on the card or something like that.
booiiing
 
Posts: 1
Joined: Mon Sep 29, 2008 9:05 am
Top

Postby cesium » Mon Sep 29, 2008 7:03 pm

chedder: This card is detected as an audigy card, so the parameter would be "audigy_digital_din" (in file /usr/lib/oss/conf/oss_sblive.conf). Anyway, you'll have to use newest 4.1 version from repo/tarball, since 4.0 versions on FreeBSD don't support module parameters while 4.1 does.
cesium
 
Posts: 896
Joined: Sun Aug 12, 2007 12:51 am
Top
Post a reply

Return to BSD

Who is online

Users browsing this forum: No registered users and 3 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
cron